FarmPhoto.com - Photos 4 farmers.
T3RRA Cutta
Thread #464018 / / Total number of messages: 9 / Thread View Count: 5193 / Add thread to favorites:
JCBDriver 464018 160 New Holland TM140 in bits either
New Holland TM140 in bits
Our NH TM140 in bits in dealers workshop AGAIN!!!. Major gearbox surgery. Hopefully this will be 3rd time lucky.
0,0,0
Re: New Holland TM140 in bits
Front half of tractor
0,0,0
Re: New Holland TM140 in bits
workshop manual at the ready, hope they know how it all goes back together
0,0,0
Re: New Holland TM140 in bits
So, what seems to be the problem?:-\
0,0,0
Re: New Holland TM140 in bits
tractor has range command box, we lost drive in some of the gears in C range. Had to drive it 20 miles back from the job I was doing, at 9.5 mph. allso dealer found that pinion shaft bearings where shot allso there was a shaft worn. so we swapped it in for a TSA135.
0,0,0
Re: New Holland TM140 in bits
Many hours? Hope you have more luck with the new one:-)
0,0,0
Re: New Holland TM140 in bits
4200 hours on clock. I hope we have more luck with the new one, all ok up to press
0,0,0
Re: New Holland TM140 in bits
What year is it? We had a 2003 TM140 which after 2 years and 2000 hours was too troublesome to keep around. Now we have a late 2005 TM190 with 2330 hours and has held up really well. Keeping it around for now. We had a 1997 8160 that we traded in 2003 with 7650 hours with next to no problems, so not sure where NH screwed up but now it seems better.
0,0,0
Re: New Holland TM140 in bits
how much does it cost???:-\
0,0,0
Loading Message List
[You must sign in to add photos or messages to this thread]
.
Please Note: FarmPhoto.com does not claim ownership of the photos posted here.
Contact individual posters for permission before using any of the photos.
0.072sec