FarmPhoto.com - Share your farming photos!
T3RRA Cutta
Thread #90886 / / Total number of messages: 7 / Thread View Count: 6049 / Add thread to favorites:
Einachser 90886 234 Agria 1900 D either
Agria 1900 D
My dad ploughing with his Agria 1900 D.

12 hp aircooled 2-stroke-diesel

4/4 transmission

plough is homemade
0,0,0
53.2338317048473,8.14401805400848
Re: Agria 1900 D
-
0,0,0
53.2338317048473,8.14401805400848
Re: Agria 1900 D
turning on the headland.
it´s some hard work I tell you.
0,0,0
53.2338317048473,8.14401805400848
Re: Agria 1900 D
-
0,0,0
53.2338317048473,8.14401805400848
Re: Agria 1900 D
-
0,0,0
53.2338317048473,8.14401805400848
Re: Agria 1900 D
Hallo!

Your Agria "Einachser" works well! (Also the homemade plow)
:-)

At house I have an Italian "Bertolini 310S" (1978, like the
newer 318 http://www.yabe.it/zappa_b.htm#3 ), a real
workhorse, one of the last SERIOUS "Einachser".. BUT in
plowing isn't so good as your Agria :-\
(Probably is the terrain... a little sandy, or the geometry
of the original plow.. not perfect)

So.. Normally I use it with a Rotary tiller or with a
trailer (so a 4x4 combo)..

Do you use only the additional weight in front? I used about
20Kg over the axle and the traction was far from good :-(
(Naturally Diff. lock engaged)
Only when my uncle (100kg :-) ) sat over the motor hood the
traction was satisfying.
The dimension and the mass of my Bertolini are more or less
the same of your Agria (7.00-16 Tyres), BUT the traction is
isn't the same :-(

I "played" with the angles of the plow (horizontal &
vertical angles).. but NOTHING! Only little improvement; BAD
WORK!


Tschüss!
0,0,0
Re: Agria 1900 D
http://www.farmphoto.com/photography/message.asp?mid=94642
0,0,0
Loading Message List
[You must sign in to add photos or messages to this thread]
.
Please Note: FarmPhoto.com does not claim ownership of the photos posted here.
Contact individual posters for permission before using any of the photos.
0.065sec